12-14-2011 07:42 AM - edited 07-03-2021 09:14 PM
Hi ALL,
In our setup we have WiSM modules installed on cisco 6506-E, ACS 5.3 virtual appliance.
We are trying to implement EAP-FAST for our Wireless using WPA/WPA2 802.1x on the WLC side.
I have followed the instructions in the following document step-by-step:
https://supportforums.cisco.com/docs/DOC-15587
Still I have no success. Tried most of the permutations on ACS EAP-FAST configuration.
I recieve the following error in acs:
Appreciate your help.
Regards
Ramakrishnan Natarajan
12-15-2011 08:20 AM
what supplicant are you using on the laptop? It looks like it is sending the username anonymous, instead of a valid username.
HTH,
Steve
----------------------------------------------------------------------------------------------------------
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.
12-17-2011 01:35 PM
can you run debugs on the controller to see whats being sent to the radius and whats coming back?
> debug client
> debug aaa events enable
Also, check how the profile has been setup on the laptop
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide