cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
608
Views
4
Helpful
3
Replies

Enable 802.11n - Need your inputs

LJ Gabrillo
Level 5
Level 5

Okay Guys need your input

I've heard that if you want to enable High Speed WLAN connection such as 802.11n you need to have you security settings as WPA2 and AES

Is this true?

1 Accepted Solution

Accepted Solutions

Hi 

Typically configuration guide - 802.11n configuration section listed this. Below is form 7.4 Config Guide section

"The 802.11n high-throughput rates are available on all 802.11n access points for WLANs using WMM with no Layer 2 encryption or with WPA2/AES encryption enabled."

Thanks for rating our responses as well. If this answer your query you can mark this thread as "Answered"

 

HTH

Rasika

**** Pls rate all useful responses ****

 

View solution in original post

3 Replies 3

Yes, You have two option

1. WPA2/AES

2. Open Authentication

Also you have to enable WMM (either "Allow" or "Required" under WLAN QoS tab ) 

 

HTH

Rasika

**** Pls rate all useful responses ****

Thanks Man,

Didn't know open-auth works as well thanks!

 

Though any docs that we can use as reference for that
 

Hi 

Typically configuration guide - 802.11n configuration section listed this. Below is form 7.4 Config Guide section

"The 802.11n high-throughput rates are available on all 802.11n access points for WLANs using WMM with no Layer 2 encryption or with WPA2/AES encryption enabled."

Thanks for rating our responses as well. If this answer your query you can mark this thread as "Answered"

 

HTH

Rasika

**** Pls rate all useful responses ****

 

Review Cisco Networking for a $25 gift card