Flex 7500 ver. 8.3.143.0 AP SSO HA Deployment

[cgutierrezc1]

Hi Team.

we have two Flex 7500 WLC release 8.3.143.0 and we need to know is possible to configure AP/SSO HA scheme.

[Mikey Boy]

Yes it is possible, you need to use the redundancy port so it has to be layer 2 or if they are in the same rack just connect the two ports directly together.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_01000.html

Regards

[cgutierrezc1]

 Mikey Boy: thanks for your answer.

We did that. But the AP SSO is never synchronized. We follow the step-by-step document.

Under what scenarios could the configuration fail?

[cgutierrezc1]

 Mikey Boy: thanks for your answer.

We did that. But the AP SSO is never synchronized. We follow the step-by-step document.

 

Under what scenarios could the configuration fail?

[Mikey Boy]

Hi, are both WLC running the same code levels? What is the output of:

Show redundancy summary

Show redundancy detail

Regards

[cgutierrezc1]

OK Mikey Boy.
I schedule another visit to the client for this Monday 28 and I will take the "show" that you ask me.
Thank you very much again for the support.