Flexconnect local switching no ip address for client

[ssingh]

Tried all the troublshoot. Just can not get client to get ip address from windows DHCP server. DhCP server and AP and Clinet on same subnet.

Switch is configured correctly, WLC vlan mapping correct. If change the AP to local mode all works just not in flex mode.  Ap at remote site with site to site VPN.

[YanL]

The way a get FlexConnect to work is:

setup a DHCP reservation for the AP in my management scope.

setup the AP switch port in trunk mode with management vlan as native, allow all the different SSIDs vlan on the trunk.

configure the AP in FlexConnect mode.

created a FlexConnect group with WAN/VLAN mapping.

add the AP in the FlexConnect group.

then my clients in remote offices get IPs from the local DHCP server.