Freeing up space in AP flash

[steelinquisitor]

Hi,

I am trying to free up some space on my 2602i AP. Is there a way to free up some flash space for the autonomous code?

I was trying to convert my 2602i to autonomous, but I got this message during the extracting

extracting ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a (12656311 bytes)Error writing flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a (Not enough space on device)

This is what I have in flash

Directory of flash:/

2    -rwx  70902     <date>               event.log

3    -rwx  7192      <date>               private-multiple-fs

4    -rwx  289       <date>               info

5    -rwx  64        <date>               sensord_CSPRNG0

6    drwx  1792      <date>               ap3g2-k9w8-mx.152-4.JB3

64   drwx  0         <date>               configs

65   -rwx  64        <date>               sensord_CSPRNG1

66   drwx  192       <date>               ap3g2-k9w7-mx.152-4.JB3a

67   -rwx  63        <date>               mesh_cfg.txt

68   -rwx  36        <date>               mesh_port_cfg.txt

69   -rwx  375       <date>               env_vars

13   drwx  448       <date>               ap3g2-rcvk9w8-mx

70   drwx  64        <date>               ap3g2-k9w7-mx.152-4.JB3a

259  -rwx  346378    <date>               crashinfo_20130901-150343-UTC

Thanks

[Stephen Rodriguez]

yeah, you can get rid of the old images.

personally when I update an ap I use the /force-reload /overwrite options.  the /o will clear the old images out.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[steelinquisitor]

For some reason, the archive command worked. It was not available when I yesterday. Does the AP need to be connected to the WLC for the archive command to appear?

[Scott Fella · Accepted solution]

If the AP has been booted up with the lightweight code, the archive command is scalable if you issue a debug capwap console CLI.

Sent from Cisco Technical Support iPhone App

[steelinquisitor]

Stephen and Scott thanks for all the helpful info.

I got the AP in autonomous now.