I have 2 1130's and 1 1240 that I am trying to configure locally switching on. The 1240 seems fine. But the 1130's, when ever I put them in h-reap mode, when the APs come back up and re-join the controller, the radios report they are administratively up but operationally down.
All APs are getting an IP via DHCP just fine. All APs are on Access Ports (non cisco switches). I just want the 1130's to operate like an autonomous AP would and locally switch traffic on the WLAN they are serving. I am not sure why the radios go down. If I switch them back to local mode, they come up.....sometimes. I am not sure where to start troubleshooting this issue. Running 7.0.98 on my WLC.