01-03-2019 02:15 PM - edited 07-05-2021 09:39 AM
Hi everyone!
It is possible to setup a HA between a WLC 5508 and WLC 5520 the 5508 as primary?
Thanks!
Solved! Go to Solution.
01-04-2019 06:42 AM
I never try before, but according to this link your 5508 will be in maintenance mode.
***Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**
*Tu reconocimiento nos alienta a seguir participando en los foros *
01-03-2019 03:40 PM
01-04-2019 06:17 AM
Ok, so we won´t be able to setup SSO HA using the redundant port if the WLC are different like this case?
Thanks!
01-04-2019 06:42 AM
I never try before, but according to this link your 5508 will be in maintenance mode.
***Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**
*Tu reconocimiento nos alienta a seguir participando en los foros *
01-04-2019 06:45 AM
Hi @molinait
Same limitation for 8.8 so, I think is not a good idea try to pairing
Here the link for 8.8
***Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**
*Tu reconocimiento nos alienta a seguir participando en los foros *
01-04-2019 07:49 AM
Thank you all for the replies!!
01-06-2019 05:09 AM
01-04-2019 07:13 AM
SSO requirement is that the wlc are the same model and on the same code. In your scenario, you will not be able to implement SSO.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide