cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
626
Views
0
Helpful
3
Replies
aricardor
Beginner

How I can improve roaming?

I have several LAP1040 controlled by a WLC 5508. A device connects to an Access Point, and I stood in front of another, and the device is connected to the first, not "jump" to the new (not put the blue light, the signal coverage is low in the device, not excellent), and the AP "new" output correctly everything, and has solid green.

3 REPLIES 3
Leo Laohoo
VIP Community Legend

More info please?

1.  What is the device/client?

2.  What firmware is your WLC running on?

3.  How much overlap do you have?

4.  Try OPEN authentication?

Hi! Thank you for your response

1.  What is the device/client?

     Samsung smartphone, with Wifi Seeker app. I have not tested with other devices. I was walking with the customer, when he asked me for roaming, and the problem occurred.

2.  What firmware is your WLC running on?

     7.2

3.  How much overlap do you have?

     On a scale of 0 to 5, the meter shows the network that gives the new point as 5, and the access point where it is connected as 1 or 2. The purpose of the network is VoWLAN.

4.  Try OPEN authentication?

      I must use WPA-PSK, according to manufacturer's (NEC).

Leo Laohoo
VIP Community Legend

Try using a laptop to test the signal/signal overlap.  Wireless NICs on smartphones/tablets behave differently to "roaming".

Is Aeronet IE disabled?

Content for Community-Ad