How to disable/enable 802.11a/b/g on AP or AP Group basis?

[Sergey Drugov]

Hello,

I have two sites (A and B), WLC 5508*2, AP3602*8 (site A) and AP3602*5 (site B). On site A I need to use 802.11a only (802.11g admin down). On site B I want to use both bands 802.11a/g. How to resolve this issue?

Merry Christmas

[Scott Fella · Accepted solution]

You would need need WLC v7.2 or later. You can use a combination of AP Groups and RF profiles to accomplish this.

RF Profiles:
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/wlan/config_wlan_chapter_011100.html

AP Groups
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Sent from Cisco Technical Support iPhone App

[Sergey Drugov]

Hello Scott,

thx for reply