cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1109
Views
0
Helpful
3
Replies
Muhammad Hassan
Beginner

How to push SSID in all AP Groups - Wireless controller 8540

we have more than 300 AP groups created in Wireless controller and want to add same SSID in all AP groups is there any shortest way and/or single command to achieve this tasks, really appreiciate for quick support. thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Rasika Nayanajith
VIP Mentor

As long as SSID is created on your WLC, I would use below CLI command to derive requried config lines to push it to your AP gorups. Once prepared, you can apply it via WLC CLI


config wlan apgroup interface-mapping add <AP_Group_Name> <WLAN_ID> <Dynamic_Int_Name>

 

HTH

Rasika

*** Pls rate all useful responses ***

 

 

View solution in original post

3 REPLIES 3
Rasika Nayanajith
VIP Mentor

As long as SSID is created on your WLC, I would use below CLI command to derive requried config lines to push it to your AP gorups. Once prepared, you can apply it via WLC CLI


config wlan apgroup interface-mapping add <AP_Group_Name> <WLAN_ID> <Dynamic_Int_Name>

 

HTH

Rasika

*** Pls rate all useful responses ***

 

 

View solution in original post

I did not find any command to push SSID in all AP GROUP.

 

Rasika,

 

you see anything regarding this.

 

Please post here.

Command is available to push ssid in one by one ap group but i want to get it done in all ap groups at a time.

For single ap group "config wlan apgroup interface-mapping add <apgroup name> <wlan ID> <interface name>"

For multiple ap group <did not find any command>
For all ap group <did not find any command>

Any help will be appreciated
Content for Community-Ad