How to remove webauth bundle from WLC

[endpoint]

Hi, how can i remove webauth files from WLC?

I have few versions of login.tar file used for webauthentication. After uploading a new login.tar file, the wlc still show old webauth bundle files.

I tried to remove customized webauth login from wireless LAN, issue clear webauth-bundle and show>custom-web webauth-bundle

WebAuth Bundle does not contain any files but when i upload new login.tar that does not include files from previous login.tar, i still get the old webauth.

Is it possible to delete extracted webauth files from the controller using CLI?

Any other ideas appreciated.

WLC is running 7.0.116.0 code.

Thanks

[endpoint]

Found a solution:

1. setup WLAN not to use customized webauth page; using default page is fine

2. run clear webauth-bundle

3. run show>custom-web webauth-bundle, make sure it does not contain old files

4. reboot WLC

5. run show>custom-web webauth-bundle, make sure it does not contain old files

6. upload new login.tar

7. preview on WLC

8. test on laptop

[George Stefanick]

Excellent. Was this documented anywhere?

[endpoint]

haven't found it in any docs. This was good old try-test methodology.

[George Stefanick]

Interesting.. Is this what you did the "clear" to

webimage       Clear the custom Web Authentication Image.

webmessage     Clear the custom Web Authentication Message.

webtitle       Clear the custom Web Authentication Title.

[endpoint]

No, i just did clear webauth-bundle. I did not have any custom webauth image or messages.

[George Stefanick]

Intersting... I am on 7.0.116.0 and i dont have clear webauth-bundle as an option from the CLI ...

[tony.sangha]

hi endpoint,

I actually did your instructions without doing a restart and it worked fine.

thanks

[endpoint]

Great, as long as it works