I am trying to establish a 1310 bridge link with LEAP authentication

[GrayH]

First of all I have the radios in a lab with the power set to 5mw.

The root state is Association processing

The root event log says RADIUS 172.20.2.105:1645,1646 is not responding. and RADIUS server 172.20.2.105:1645,1646 has returned.

The non root state is EAP-Associated but the radio int staus is Software Status Disabled Hardware Status Down

I have included the root and non root configs in an atachment

[rnigam]

Your configuration is wrong. correct it by using authentication open eap eap_methods

[GrayH]

Thank you for taking the time to review the configs. I will be able to make the change Friday.