11-28-2022 09:24 PM
I want to connect WLC9800 and ISE with TACACS.
Documents I referenced is
'https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/214490-configure-radius-and-tacacs-for-gui-and.html #anc11'.
I followed that document, but I connected to WLC with SSH,
When ENABLEd
'%Error in authentication.'
A phrase appears
It does not enter ENABLE mode.
Please respond if you have a solution.
11-28-2022 11:24 PM
- Ref : https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/214490-configure-radius-and-tacacs-for-gui-and.html#anc11
>....Note: in order to use ISE as TACACS+ server, you must have a Device Administration license package, and either a Base or a Mobility license. Also, once the licenses are installed, you must enable the Device Admin feature for the node. To do so, edit the node deployment node under Administrator > Deployment, and check the box:
M.
11-30-2022 09:13 AM
What do the ISE logs show?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide