i want to use acces point air sap1602i e k9 first times i need default ip adress

[fouadissam]

hi

 i want to use acces point air sap1602i e k9  first times i need default ip adress to setuop

it is possible if not give me please solution 

[Prakash Parvathala]

Hello fouadissam,

You can connect to the AP with a console cable and enter show ip interface brief, which will display the ip address.
 
If its connected to a network you can log into your switch and enter show arp | i xxxx.xxxx.xxxx(mac address of the AP).
 
The below link points to a configuration guide that may be helpful.

http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/15_2_4_JB/configuration/guide/scg15_2_4_JB3a.pdf

[Moin Ilyas]

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html