Hello
I have a conjuration that could not have been done without the assistance of Tyson Joachims and it works perfect.
What I want to do now is "phase 2" of my config and it was mentioned that ideally I would set up the other 2 AP's via PoE and have them configured identically except the BVI1 IP Address and I am good to go.. Unfortunately I am unable to do PoE at this time so they will be isolated AP's obtaining their connection to the Main AP via Wireless. I have found this link and I can see the little things to change but I am still unsure how to make them repeaters/extenders withOUT using PoE.
I don't necessarily need a step by step carry on this but some direction/links or focus would be greatly appreciated.
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/atnms-ap-8x/configuration/guide/cg-book/cg-chap19-wgb-standby.html
