10-06-2022 06:03 PM - edited 10-06-2022 06:05 PM
I am running into a very strange issue. Trying to setup and ACL rule under Advanced > Security Settings on the 140AC web interface. For some reason it will not accept the mask for the IP I entered. I don't see the problem. Did I miss something or is this a bug? I am running the latest firmware on the AP.
I attached screenshot showing the issue. I tried different IP ranges, class A and class C. It rejects every subnet I specify, even 255.255.255.0 for IP 192.168.1.2. So that is not network or broadcast.
Solved! Go to Solution.
10-20-2022 09:44 PM
Ok so after talking with TAC, we determined it is a bug in the firmware. So ACLs don't work for what I was trying to achieve after support tried multiple optionss.
10-08-2022 02:45 AM
Only guessing here (never used the product) but did you try 192.168.1.0 and 255.255.255.0 ?
I can imagine a developer assuming the mask 0 octet should correspond to "subnet zero" portion of the IP.
10-08-2022 08:54 AM
10-20-2022 09:44 PM
Ok so after talking with TAC, we determined it is a bug in the firmware. So ACLs don't work for what I was trying to achieve after support tried multiple optionss.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide