08-26-2020 12:55 PM - edited 07-05-2021 12:27 PM
Hello
we have a wireless network with C9800-CL and access points 9115ax. AuthC and authZ is made by ISE with EAP-TLS.
Every device is working fine, except iPhone11 Pro. It connect to the WLAN smoothly. However, if we left the office and then return, the iPhone does not reconnect automatically. We need to remove the WLAN and add it again.
Has anyone seen this?
Thank you
Marcos
Solved! Go to Solution.
08-31-2020 05:57 PM
08-26-2020 01:30 PM - edited 08-26-2020 01:31 PM
How did you configure WLAN security? pls, attach a screenshot of WLAN -> Security -> L2 settings to see.
Also what version of code you running on 9800?
Rasika
08-26-2020 02:23 PM
08-26-2020 02:36 PM
Thank you for the output. You doing standard 802.1X here.
How about Fast Transition setting on the same page. Did you leave it to "Adaptive" which is the default setting or you disabled it.
If it is Adaptive FT, I would check with disabling that and see if that makes any difference.
HTH
Rasika
08-27-2020 04:22 PM
Thank you Rasika, I will give it a try but the issue happens even when the user is at his desk. There is no roaming.
08-31-2020 05:57 PM
Hello
issue was at the MDM AirWatch solution.
Thank you
Marcos
08-31-2020 06:07 PM
How does that affect client roaming? if you can share bit more info, that may be useful to many of us in this forum
Rasika
09-01-2020 10:27 AM
Sure. As soon as I get an answer from the team responsible for it I will update this post.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide