Is it possible to set up the guest wired vlan without foreign WLC

[robert.huang]

Hello All,

We have only one central 5508WLC installed at the Data Center. All APs in multiple offices are in H-REAP mode and tunneled back to the WLC via MPLS cloud.

We have the guest wireless set up already. Now there is a requirement to set up the wired guest. Is it possible to set up the guest wired vlan without local WLC requirement?

Thank you very much in advance.

Robert

[mscherting]

I don't think so.

Wired guest vlan needs to be L2 (vlan) trunked to the WLC.

[Ravi Singh]

I don't think So. You can not setup guest wired lan without foreign WLC

[Sebastian Helmer]

Yes, defenetly but u need a Cisco 600OEAP. If it works without a NAT setup u need for the OEAP normally I'm not sure. But maybe that's an idea for you.

[robert.huang]

Hi Sebastian,

Can you share a doc of how to achieve the goal with a Cisco 600 Office Extender AP? Thank you.

Robert

[Sebastian Helmer]

Hi Robert,

here u go.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110000.html#ID2179

Regards,

Sebastian

pls. Rate if helpful

[Sebastian Helmer]

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-600-series-officeextend-access-point/113003-office-extend-config-00.html