12-17-2020 01:04 AM - edited 07-05-2021 12:55 PM
hello
I want to use wpatkip.
However, the GUI does not have tkip, only WPA2 and WPA3.
However, can tkip be used by configuring 'config wlan security wpa2 cippertkip enable wlan_id' or 'config wlan security tkip'?
Version 8.10.131
Solved! Go to Solution.
12-17-2020 01:54 AM
Hi,
As per my knowledge....
If you are using Wave2 AP and WPA2 TKIP is enabled, it may cause client connection problems. This is because the Wave2 AP does not support WPA2 TKIP. In versions 8.4 and above, the following warning will appear if you enable TKIP.
(wlc) >config wlan security wpa wpa2 ciphers tkip enable 1
Warning! WPA2 TKIP cipher is not supported on Wave2 APs for WLAN 1
Regards
Dont forget to rate helpful posts
12-17-2020 01:54 AM
Hi,
As per my knowledge....
If you are using Wave2 AP and WPA2 TKIP is enabled, it may cause client connection problems. This is because the Wave2 AP does not support WPA2 TKIP. In versions 8.4 and above, the following warning will appear if you enable TKIP.
(wlc) >config wlan security wpa wpa2 ciphers tkip enable 1
Warning! WPA2 TKIP cipher is not supported on Wave2 APs for WLAN 1
Regards
Dont forget to rate helpful posts
12-17-2020 02:10 AM
olny use 2.4GHz
Then, can I use it normally?
If you put in the config you taught me.
12-17-2020 02:25 AM
you can give a try. It should not work and cisco also not recommend to use TKIP.
Regards
Dont forget to rate helpful posts
12-17-2020 02:39 AM
This is the last question.
Is there a way to connect with my phone or Windows by tkip?
12-17-2020 08:32 AM
Don't enable TKIP. Besides loosing speeds > 54 Mbps, it offers no security. If you anyway don't need encryption/security, use an unencrypted SSID.
12-17-2020 12:53 PM
Our customer's terminal can only be connected by TKIP.
That's why I have to use TKIP. Is the config up there correct?
12-17-2020 01:17 PM
Well.... have you tired it? As like the others mentioned, you can try the command or else you will need to downgrade.
12-17-2020 09:53 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide