08-14-2013 12:49 AM - edited 07-04-2021 12:38 AM
have one query for ISE 1.2
Is the following scenario is supported with ISE?
Can we configure ISE VLAN mapping with SSID authentication web auth only.
08-15-2013 02:02 PM
Can you explain a bit more? If i understood correctly, this will not work. ISE can do a AAA override for 802.1X auth.
I ll need to check but 7.5 code may support 802.1X + webauth
This is something which may work
Sent from Cisco Technical Support iPhone App
08-15-2013 09:08 PM
If you are using mac-filtering with Central Web Auth then this should be supported. However if you are using local web auth, you will have to wait for Viten's response.
Thanks,
Tarik Admani
*Please rate helpful posts*
08-19-2013 01:23 PM
Limitations
No support for guest clients – posture for guest user is not supported.
Hreap local switching is not supported -
No support for wlans without 802.1x support
Client will go through posture during slow roam – when client is associated used 802.1x (not wpa2 or cckm) then when client roams from one wlc to other – wlc will send new session ID hence client will again go through posture validation process.
No support for guest tunneling mobility
Mac auth bypass is not supported
Vlan pooling is not supported.
No support for WGB AP
No support for AP group.
Kindly find the link information regarding integration is mention.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide