Hi,
On the business, we have 4 access point WAP371 Wireless AC/N Dual Radio Access point with single point setup.
Firmware Version (Active Image): 1.2.0.2
Firmware Version (Non-active): 1.1.2.3
Connected to Cisco switch SG300-10PP
All working good except one problem. All user here use iPhone or Android cell phone, connected to our Wireless. No problem at this time.
The distance between each access point is only +/- 50 feets. We have a long corridor, so we place 4 access point to have the better signal as possible, always.
When any user moves away, gradually he loses the signal until he has left only one bar, even placing himself just below the next access point. He must disable wifi on his cell, and reactivate again to have wifi on his cell full signal.
Obviously, we have the same wireless network name and the same password on the 4 access point.
I dont understand where is the problem.
If you need any screen shot of my configuration to help, let me know.
All access point was configured by a company specialized in the network, but the problem persists.
