12-18-2019 05:48 AM - edited 07-05-2021 11:27 AM
As per document https://www.cisco.com/c/en/us/support/docs/wireless/aironet-3800-series-access-points/200898-Link-aggregation-on-1800-2800-3800-AP.html
Note that as of 8.4 software version, there is no means of securing the access port if using LAG (no 802.1x and no mac address authentication).
Kindly confirm the meaning of above line.
Will LAG work on WLC IOS version 8.3.150.0?
Solved! Go to Solution.
12-18-2019 01:22 PM
By reading this line I am guessing yes but you will need to check the release notes for the WLC version
For this configuration example 2802 AP was used. Switch used was WS-C3650-48PQ running software version 03.06.05E. AP was joined to 2504 on 8.2.141.0
If you are not doing port security or AP authentication then it should work
12-18-2019 01:22 PM
By reading this line I am guessing yes but you will need to check the release notes for the WLC version
For this configuration example 2802 AP was used. Switch used was WS-C3650-48PQ running software version 03.06.05E. AP was joined to 2504 on 8.2.141.0
If you are not doing port security or AP authentication then it should work
12-18-2019 11:23 PM
Thank you very much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide