cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1543
Views
0
Helpful
5
Replies

lap 1121N can't join 5508 controller

bayrem Nasri
Level 1
Level 1

hi, i'am trying to configure an AP1121g on my controller wlc5508 7.2 but i'am facing a compatibility issue. please confirm that this access point is supported by this wlc best regards bayrem

best regards

2 Accepted Solutions

Accepted Solutions

Stephen Rodriguez
Cisco Employee
Cisco Employee

the 1121 is not supported on 7.2 code.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp784122

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

It's not the WLC you have to worry about when checking AP compatability, it's the release of code.

The last version the 1121 is supported on is 7.0.235.0.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_235_0.html#wp784122

Remember to check the release notes of the software you are wanting to upgrade to for AP/WLC compatabilty as well as what features have been introduced.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

5 Replies 5

Stephen Rodriguez
Cisco Employee
Cisco Employee

the 1121 is not supported on 7.2 code.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp784122

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Hi,

I'am asking about 1121g, it is supported by 5508 controllers, if so , can you give me the last support software support?

thanks

It's not the WLC you have to worry about when checking AP compatability, it's the release of code.

The last version the 1121 is supported on is 7.0.235.0.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_235_0.html#wp784122

Remember to check the release notes of the software you are wanting to upgrade to for AP/WLC compatabilty as well as what features have been introduced.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

thunk u for your help

in the release note, only the 1121 is mentioned, i can't find the 1121g access point in the supported acess point list. i will downgrade the version of the wlc and see if this solve the broblem.

thx, the issue is solved with a downgrade from the 7.2 release to the 7.0 release

Review Cisco Networking for a $25 gift card