I was wondering if Layer 2 security can be used with auto-anchored WLANs.
I need to deploy two new isolated WLANs which will terminate in two DMZ environments.
I was hoping to use the existing WCS-managed infrastructure with 4404 and 4402 WLCs and just throw on a couple more WLANs.
However, I've built a little test environment and while I can get the new VLAN traffic tunneled and origininating from the correct anchor controller with no layer 2 security - as soon as I turn on WEP or WPA security options it stops working. I can't find anything in documents or this forum to show auto-anchor mobility with anyhing other than unsecured guest WLANs.
Am I trying to do somethng unsupported or is it just an error on my part?
no, the users are internal so I only want to use L2 security. I can't see that L3 should be a problem to add on though. I'm using 3.2.x of the WLC code - so there is no "Guest LAN" mode - I was playing with the new versions and it looks like L2 security is disabled in that mode?
If you want to see how I got my bit working I would be happy to share my doco when I'm done.
We are excited to announce the Second refresh of 17.6.2 EFT/Beta Program for PRODUCTION deployments.
This release is the second qualified EFT/Beta Image and is BU supported.
After previous 17.6.1 CCO, this p...
Listen: https://smarturl.it/CCRS8E33 Follow us: https://twitter.com/ciscochampion The goal for stadium and large venue Wi-Fi is to deliver an exceptional, fast, and reliable wireless experiences to tens of thousands of fan...
We are pleased to announce the immediate availability of the IOS-XE release 17.6.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
This version now introduces experimental new feature, "Upgrade Advisor, targeted to one of common case generators: what are the supported versions and how to upgrade my current controllers and APs
It supports both AireOS and IOS-XE, covering since ...
Thank you for the overwhelming response to the First and Second EFT refresh of 8.10MR6!
We are excited to announce the third refresh of 8.10 MR6 EFT Program for PRODUCTION deployments.
While the CCO release of 8.10MR6 is just a few we...