Lightweight Access Point (LAP) Authorization on AAA

[nibinrodrigues]

Hi,

I have 4 WiSM and 8 controllers and around 600 AP's. Currently ereything is working fine. Now I need to implement security and as a result am planning to authenticate my AP;s against AAA. We have 2 ACS 1113 running in 4.2. I am using the following document for reference

"http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808c7234.shtml"

My issue is all the AP's are associated with controller so how I will implement the senario with mininal downtime. I enabled

"Authorize APs against AAA" in 1 controller but my AP got registered in another controller. My concern is if I enable it on all controllers will all my AP's will be disconneonnetd from my network.

Thanks

Nibin

.

[Scott Fella]

When you enable Authorize AP using AAA, APs that are joined will not be affected. This affects any new AP that join. So if an AP reboots or maybe moves to another WLC then the AP is checked if authorized.

Sent from Cisco Technical Support iPhone App