I have a guest network setup utilising the Cisco auto anchor configuration. My Guest WLAN terminates on the Anchor controller. The Guest WLAN is distributed accross numerous sites. I now have a requirement to provide printer access for guests.
Are there any tricks to allowing Guest traffic to gain access to local network printers? I read about the OEAP Split Tunneling for local printers and was wondering if there is anyway of doing this with the auto anchor configuration?
In auto-anchor mobility mode, a subset of a mobility group is specified as the anchor controllers for a WLAN. You can use this feature to restrict a WLAN to a single subnet, regardless of a client’s entry point into the network. Clients can then access a guest WLAN throughout an enterprise but still be restricted to a specific subnet. Auto-anchor mobility can also provide geographic load balancing because the WLANs can represent a particular section of a building (such as a lobby, a restaurant, and so on), effectively creating a set of home controllers for a WLAN
We are excited to announce the Second refresh of 17.6.2 EFT/Beta Program for PRODUCTION deployments.
This release is the second qualified EFT/Beta Image and is BU supported.
After previous 17.6.1 CCO, this p...
Listen: https://smarturl.it/CCRS8E33 Follow us: https://twitter.com/ciscochampion The goal for stadium and large venue Wi-Fi is to deliver an exceptional, fast, and reliable wireless experiences to tens of thousands of fan...
We are pleased to announce the immediate availability of the IOS-XE release 17.6.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
This version now introduces experimental new feature, "Upgrade Advisor, targeted to one of common case generators: what are the supported versions and how to upgrade my current controllers and APs
It supports both AireOS and IOS-XE, covering since ...
Thank you for the overwhelming response to the First and Second EFT refresh of 8.10MR6!
We are excited to announce the third refresh of 8.10 MR6 EFT Program for PRODUCTION deployments.
While the CCO release of 8.10MR6 is just a few we...