cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
743
Views
0
Helpful
5
Replies

Low power alarms

u297863AG
Level 1
Level 1

Why am I getting low power alarms on APs connected via power injectors?

5 Replies 5

Stephen Rodriguez
Cisco Employee
Cisco Employee

what type of AP, aIOS or CUWN?

If aIOS:

power inline negotiation injector installed.

If CUWN

You can go in and check the power injector option in the AP config

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Its lightweight...and Power Injector State is already enabled.

       

change it to override, and see if that fixes it.

What type of AP and injector are you using?

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Changing to override didn't clear the alarm. Its a 1252 AP and I'm not sure what type of injector is connected.

Review Cisco Networking for a $25 gift card