Manage C9120AXI-F using AIR-CT5520-K9

[bezeddin]

Hi All,

Can we manage C9120AXI-F using AIR-CT5520-K9 ?

Regards

Budi

[Leo Laohoo]

As long as the controller is running the correct supported firmware (8.10.X.X).

[bezeddin]

Thanks @Leo Laohoo for the insight 

as per checking on CCM the only software release is 8.2

can we upgrade later using SNTC service ?

Regards

Budi

[MohamedHussen]

Any software version less than 8.10 the AP C9120AXI will not register.

[Leo Laohoo]

WLC must be running 8.10.X.X -- I cannot be more clear than that.  

If the controller "has to" be on 8.2.X.X then convert, at least, one 9130ax into Mobility Express.  All the other 9130ax will be controlled by the ME.

[marce1000]

 - Go here for compatibility info's :
            https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

 M.