
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-24-2020 06:03 PM - edited 07-05-2021 11:46 AM
Can I give the maximum client count for 1852E / 1852I as a document or url?
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 01:59 AM
Hi,
Cisco recommends no more than 25 clients per WAP, type of traffic also matters.
If the type of traffic is mostly emails, web browsing, etc ... then the value can go up to 35 clients per WAP. If the type of traffic is video then the value is around 8 to 10 clients per AP.
Regards
Dont forget to rate helpful posts
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 03:14 AM
Check this website...where you can compare diff models of cisco APs.
Here cisco mentioned that 1850 can support max 400 clients per radio.
still i will say its theoretical....
Regards
Dont forget to rate helpful posts
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 03:21 AM
"support up to 200 clients" is just marketing talk.
No technical person would like to see >35 wireless client per AP (for low traffic).
For voice traffic, <10. For HD video, <8.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 06:37 AM
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Approximating_Maximum_Clients_per_Access_Point
*** Please rate helpful posts ***
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-24-2020 08:41 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 01:31 AM
max user
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 01:59 AM
Hi,
Cisco recommends no more than 25 clients per WAP, type of traffic also matters.
If the type of traffic is mostly emails, web browsing, etc ... then the value can go up to 35 clients per WAP. If the type of traffic is video then the value is around 8 to 10 clients per AP.
Regards
Dont forget to rate helpful posts
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 02:07 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 02:14 AM
No there is no cisco documents about regarding my last post.
Normally vendors will always say that it can support up to 200 clients, but it doesn’t mean it will work. Rule of thumb to be safe is 25-30. . Please note that this is only a theoretical maximum; in practice, interference caused by multiple clients communicating simultaneously will cause this limit to be far lower.
Regards
Dont forget to rate helpful posts
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 02:29 AM
you can't even find a Cisco-provided document for up to 200 clients?
I couldn't find max clients even in the datasheet
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 03:14 AM
Check this website...where you can compare diff models of cisco APs.
Here cisco mentioned that 1850 can support max 400 clients per radio.
still i will say its theoretical....
Regards
Dont forget to rate helpful posts
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 03:21 AM
"support up to 200 clients" is just marketing talk.
No technical person would like to see >35 wireless client per AP (for low traffic).
For voice traffic, <10. For HD video, <8.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-25-2020 06:37 AM
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Approximating_Maximum_Clients_per_Access_Point
*** Please rate helpful posts ***
