cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
612
Views
0
Helpful
2
Replies

Meaning of 'Throughput' in WLC UI

EE_36220
Level 1
Level 1

Hi,

Attached is the 'Access Point View' UI of a WLC with firmware 8.2.100.0 and would like to know the meaning of 'Throughput'.

The AP in this view is a Root AP 'RAP' with only one Mesh AP 'MAP' connected and the mesh link at that time is MCS13 (MAP to RAP) and MCS11 (RAP to MAP), also, the mesh link was having a continuous traffic of around 6Mbps.

1 Accepted Solution

Accepted Solutions

patoberli
VIP Alumni
VIP Alumni

Good question, I guess you should see that traffic there.

In any case, you run an extremely old and buggy software release and I recommend you to upgrade to 8.2.151.0. Your build is actually called back for various reasons.

View solution in original post

2 Replies 2

patoberli
VIP Alumni
VIP Alumni

Good question, I guess you should see that traffic there.

In any case, you run an extremely old and buggy software release and I recommend you to upgrade to 8.2.151.0. Your build is actually called back for various reasons.

Thanks!

Review Cisco Networking for a $25 gift card