03-29-2018 03:05 AM - edited 07-05-2021 08:26 AM
What does the below command do
config ap unifiedmode <switch_name> <switch_ip_address>
If I execute this command from the an mobility express AP, does it convert the current AP also to capwap
Regards
Nikhil
03-29-2018 10:20 AM
Hi
Nop. This command must be ran on the wlc and is suitable for many APs.
For one AP use the command "ap-type capwap"
-If I helped you somehow, please, rate it as useful.-
03-30-2018 12:50 AM
My issue is like this, I have already mounted the access point in a remote location. Now I don't have the console access to the AP. How can I convert the AP to the capwap
As per my understanding when mobility express AP come up, the AP will look for a master controller, if master controller is not available, the AP will go into the initial configuration for the controller. Is there any way I can telnet/ssh to the AP at this moment.
or if connect to the SSID CiscoAirProvison is there any way I can convert to capwap
Regards
Nikhil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide