cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1160
Views
0
Helpful
1
Replies

Multiple Aironet 2802i in ME

sushahid
Cisco Employee
Cisco Employee

Hello i have multiple 2802i AP running Mobility Express image.  Primary 2802I is working and controller is running off that perfectly but the second 2802i AP which was converted over to ME has also joined the Controller but no under ME AP i see no clients connect to it, and the LED's are flashing RED/Blue/Green.  I can see it has the same image as the other AP with ME Controller.  What am i missing here?

 

Thanks

1 Reply 1

HaifengLi
Cisco Employee
Cisco Employee

 

1. check POE or power injector.

2. check Radio interface(show ip int brief).

 

Cycling through Blue-Red-Green-Off General warning; insufficient inline power

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/2800/quick/guide/ap2800iegetstart.html#pgfId-69305

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: