Is there a way to be able to configure access over different SSID's? So being one "SSID 1" and printing to a device on "SSID 2"? Ive been looking into this but not getting a solution. Or if its posible.
We are using Bonjour with Apple devices on the WLAN that are in the same SSID, and it works fine. What I am trying to figure out is, is it possible to do this over different SSID's. RIght now it wont work, but on the same SSID it will.
ok!! Do u need seperate SSID for data traffic and a seperate SSID for printing or bonjour?? So that ppl who wanna print should connect to other SSID and print??
If so, then this can be done!!
No, we have 3 SSID's currently and just want to be able to print if lets say someone connected to SSID #3 print to a device on SSID #1.
If I read your statement correctly you have 3 diff ssid's.
ssid #1 is for printers or at least has some wireless printers associated to it or has a printer on the same vlan that the ssid shares right?
And you want to allow users from ssid #2 & #3 to be able to print to printers on ssid #1 correct?
If that is correct then what you need to do is make sure that there is routing between the vlans on the switch or router that is associated with those vlans or subinterfaces.
I do not believe this is really an ssid issue but rather a layer 3 "routing" question.
If you are using ACL's you will also have to make sure to add rules to "permit" those ports across the vlans/subinterfaces.
Hope that helps clear it up a little for you.
If not, add more specific details so we can try to assist you better.