cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
457
Views
0
Helpful
5
Replies

NCS 1.1.3.2 not compatible with WLC Code 7.6 ?

Maddin B
Beginner
Beginner

Hello,

i have updatet my WLC 2504 Controllers. I want to applie a new wlan template. But I get only the error message:

"Reason: SNMP operation to Device failed:                           "

The SNMP Reason is empty....(See attachment)

I work with "Cisco Prime Network Control System". Is this out of date?

I have seen the Version of "Cisco Prime Infrastructe" is newer from date?

 

Can anyone help me?

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame Guru Hall of Fame Guru
Hall of Fame Guru

You would need PI 1.4 or PI 2.0, but PI 2.1 should be out by the end of the month hopefully which is for the v7.6.  With v7.6, the two versions mentioned will only monitor and show compatibility as if the WLC was on v7.4.

-Scott
*** Please rate helpful posts ***

View solution in original post

5 Replies 5

Scott Fella
Hall of Fame Guru Hall of Fame Guru
Hall of Fame Guru

Keep this handy as this will show you all the compatibility between various wireless devices and code version:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

-Scott
*** Please rate helpful posts ***