In troubleshooting some issues, I noticed that on monitoring a few 3602's, the CleanAir Sensor Status would report Down on some AP's, despite on the same controllers and floor, some would report up. This seems to be only on the g radios as well. I can tell you for an AP in SE-CONNECT mode, even though it says it's Down, Spectrum Expert has no problem connecting to it and utilizing the G radio.
Hello, I Have some problems to update the CiscoAny Connect from version 4.4 to 4.8 and 4.9 The process of installation stop and reverse. Do someone know how can I uninstall the current version at all in w...
Hello Community, I have an issue where APs do not connect to the WLC. Connection is made over VPN. Until yesterday all 3 APfailed with below errors. We change the LAN connection to a cisco router and now one of the AP magically connected to the...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
Cisco Champion Radio · S8|E6: Fastlane+ Optimizes Network and Device Communication
Cisco Fastlane+ is a co-developed solution with Apple that significantly improves the experience of any Wi-Fi 6 capable iPhone or iPad connected to a Cisco Catalyst 9130 A...
We are pleased to announce the immediate availability of the IOS-XE release 17.4.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link: