cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
632
Views
0
Helpful
1
Replies

Need to receive alarms by e-mail for AP Utilization beyond the threshold

JGatti
Level 1
Level 1

Hello,

 

I am using Cisco Prime 3.1. I need to set a threshold for AP Utilization. Then, need to generate alarms for when the utilization is above that limit and receive those alarms by e-mail. I've seen that some questions about this issue have been made but I couldn't solve my problem. I have seen too that in Monitor/Monitoring Tools/Alarms and Events/Email Notification/AP you can set the security levels for the alarms to be sent and you can indicate the mail address as well. However, I just want to receive AP Utilization over the threshold alarm, not all (i.e.) Critical alarms. Moreover, I couldn't find what is the security level in which utilization over the threshold alarm it is.

 

Thanks in advance,

1 Accepted Solution

Accepted Solutions

Salma Sulthana
Cisco Employee
Cisco Employee

Hi JGatti,

 

Please do refer the link below to customize or create the Threshold Values on prime.

 

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/mon-pol-thresh.html

 

Regards

Salma

View solution in original post

1 Reply 1

Salma Sulthana
Cisco Employee
Cisco Employee

Hi JGatti,

 

Please do refer the link below to customize or create the Threshold Values on prime.

 

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/mon-pol-thresh.html

 

Regards

Salma

Review Cisco Networking for a $25 gift card