12-26-2013 07:57 AM - edited 07-04-2021 11:51 PM
I just started working for a company that has no documentation for the network. What i am trying to do is setup 7925 wireless phone and the wireless system uses a 5508. The WLAN for the phones has a pre shared key but it just shows 3 asterisks. I can't find anywhere in the CLI either to show me in plain text. Can someone tell me how I can retrieve it?
Solved! Go to Solution.
12-26-2013 09:11 AM
No you don't... if you have to change the PSK, then you will have to change it on the WLC and then on each phone. You might want to take a look at this bulk utility.
http://www.cisco.com/web/software/282074239/14006/792xBD.1-0-Readme.pdf
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
12-26-2013 08:01 AM
You will not be able to see the pre-shared key if you are using WPA/WAP2 w/psk. If you are using WEP, you can.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
12-26-2013 08:03 AM
To view the wep key
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
12-26-2013 08:40 AM
In viewing the WLAN security it is WPA+WPA2. Do I have any other options other than changing it and going to each phone currently using it to put in the new PSK?
12-26-2013 09:11 AM
No you don't... if you have to change the PSK, then you will have to change it on the WLC and then on each phone. You might want to take a look at this bulk utility.
http://www.cisco.com/web/software/282074239/14006/792xBD.1-0-Readme.pdf
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
12-26-2013 10:13 AM
Thanks for the information. I went ahead and just created another WLAN until I can track down the PSK. Great info Scott.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: