cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4092
Views
0
Helpful
3
Replies

No AP manager addresses/no valid AP manager found

tyler.perkey
Level 1
Level 1

Hi All,

 

I'm trying to connected an 1831 AP to an eval version of vWLC 8.x (I've tried multiple) and keep getting this error:

No more AP manager addresses remain..
[*12/15/2020 16:02:01.8307] No more AP manager addresses remain..
[*12/15/2020 16:02:01.8307] No valid AP manager found for controller 'WLC' (ip: 10.0.0.99)
[*12/15/2020 16:02:01.8307] Failed to join controller WLC.
[*12/15/2020 16:02:01.8307] Failed to join controller.
[*12/15/2020 16:02:19.9550] Restarted PnP Discovery timer after time sync for 90 seconds

 

The AP joined 1 time running 8.10, updated it's image then wouldn't connect again.

 

Everything is on a flat network, it finds the controller, NTP is set.  I can't find any reason it does not connected to the controller.

3 Replies 3

Pls try "capwap ap erase all" command on AP CLI

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/wave2-ap/command-reference/8-8/b-cisco-wave2-ap-cr-88/capwap_commands.html#wp3236501360 

 

HTH

Rasika

*** Pls rate all useful responses ***

I just discovered the problem, my management port and service port being on the same network was causing some conflict.  When I disabled the service port network adapter in ESXi the AP joined properly.

Good to hear that...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: