USE Firefox! Just for kicks I opened FF instead of IE and it opened OK. Normally I use IE because upgrades through FF fail. Very interesting, the GUI does not work in IE 11.
This is crazy. I have this exact same problem where no GUI, however, it does load the correct IOS.
flash:/ap1g2-k9w7-mx.152-2.JB2/ap1g2-k9w7-mx.152-2.JB2
Seeing as the OP had both the CAP and SAP images, this one is slightly different as it is not booting into a controller based image.
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
!
logging rate-limit console 9
enable secret 5 $1$5KsO$twQjsR.70APBnCAhC3mGe.
!
no aaa new-model
no ip routing
no ip cef
!
!
!
dot11 syslog
!
crypto pki token default removal timeout 0
!
!
username Cisco password 7 14341B180F0B
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
no ip route-cache
shutdown
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
antenna gain 0
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
!
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
transport input all
!
end
