07-05-2021 08:55 AM - edited 07-07-2021 08:59 AM
Hello
i can`t get connect to my ap 2702i my wireless password ist 12345678.
i use this script to configure my ap
configure terminal hostname AP4 ip default-gateway 192.168.178.1
ip http server
ip http secure-server
ip http authentication local
dot11 ssid Doerk_2 guest-mode authentication open authentication key-management wpa version 2 wpa-psk ascii 12345678 exit interface dot11Radio 0
ssid Doerk_2
Speed throughput
power local max encryption mode ciphers aes-ccm tkip channel least-congested no shutdown exit
interface dot11Radio 1
ssid Doerk_2
Speed throughput
power local max encryption mode ciphers aes-ccm tkip channel least-congested no shutdown
exit
exit write memory
where ist the mistake or what is missing?
greets
Dirk
Solved! Go to Solution.
07-06-2021 06:47 AM
first remark is : some sections occur twice in the script you posted
-> please review and remove double commands
authentication open and using pre-shared key seems contradictory
Understanding Authentication Types
Open Authentication to the Access Point
Shared Key Authentication to the Access Point
EAP Authentication to the Network
MAC Address Authentication to the Network
Combining MAC-Based, EAP, and Open Authentication
07-06-2021 06:47 AM
first remark is : some sections occur twice in the script you posted
-> please review and remove double commands
authentication open and using pre-shared key seems contradictory
Understanding Authentication Types
Open Authentication to the Access Point
Shared Key Authentication to the Access Point
EAP Authentication to the Network
MAC Address Authentication to the Network
Combining MAC-Based, EAP, and Open Authentication
07-07-2021 07:47 AM
edit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide