cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1781
Views
0
Helpful
5
Replies

Nokia Lumia support for Cisco WLC

junshah22
Beginner
Beginner

Dear All,

I am using Cisco Wireless LAN Controller 4404 in my network, All devices (Laptops, samsung mobile phones, Iphone, HTC, etc) are connecting and working perfectly but NOKIA Lumia mobile phone is unable to connect.

Is there any hotfix for WLC available? please advise

Regards,

Junaid

1 Accepted Solution

Accepted Solutions

Not sure which models are you using ? But as per this technical specs certain Lumia models do not support WAP2 Enterprise.

http://developer.nokia.com/Devices/Device_specifications/Comparison.xhtml?dev=Lumia_1020,Lumia_920,Lumia_925

(Under connectivity -> WLAN support you can find the below information)

Please check the technical spec of the phone model you are using & ensure it is supporting WAP2 Enterprise

HTH

Rasika

**** Pls rate all useful responses ****

View solution in original post

5 Replies 5

maldehne
Cisco Employee
Cisco Employee

debug client < client mac >

while you are trying to connect , so that we can tell you at which stage the phone is suffering

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

1.  What firmware is your WLC running?

2.  Create an OPEN SSID and see if the Nokia can join the wireless network.

3.  As with maldehne has stated, post the output to the command "debug client " while it is trying to join so we can see what is going on.

Please find below debug details, I started debugging the device by command debug client (client mac) and then tried to connect the device.

*dot1xMsgTask: Sep 25 12:14:03.096: ec:f3:5b:d3:99:20 dot1x - moving mobile ec:f3:5b:d3:99:20 into Connecting state

*dot1xMsgTask: Sep 25 12:14:03.097: ec:f3:5b:d3:99:20 Sending EAP-Request/Identity to mobile ec:f3:5b:d3:99:20 (EAP Id 1)

*Dot1x_NW_MsgTask_0: Sep 25 12:14:03.148: ec:f3:5b:d3:99:20 Received EAPOL START from mobile ec:f3:5b:d3:99:20

*Dot1x_NW_MsgTask_0: Sep 25 12:14:03.148: ec:f3:5b:d3:99:20 dot1x - moving mobile ec:f3:5b:d3:99:20 into Connecting state

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.035: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.076: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.076: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.076: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.112: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

And on cell phone it shows the following message:

connection unsuccessful,

the credentials provided by the server couldn't be validated,

I tried to connect it without any encryption and it got connected successfully, issue only on wpa2-Enterprise.

Please advise,,,

Regards,

Junaid

Not sure which models are you using ? But as per this technical specs certain Lumia models do not support WAP2 Enterprise.

http://developer.nokia.com/Devices/Device_specifications/Comparison.xhtml?dev=Lumia_1020,Lumia_920,Lumia_925

(Under connectivity -> WLAN support you can find the below information)

Please check the technical spec of the phone model you are using & ensure it is supporting WAP2 Enterprise

HTH

Rasika

**** Pls rate all useful responses ****

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers