Not able to connect Air-CAP2702 to WLC 5508

[nasersayar1]

Dear All,

I will much appreciate to let me know how to connect the Access point AIR-CAP2702 to the wireless controller 5508 I try a lot but the access point does not appear on the wireless controller.

many thanks and best regards,

Naser Ahmad  

[Leo Laohoo]

Console into the AP and in enable mode, enter the following: 

1.  capwap ap ip address <IP Address> <Subnet mask>;

2.  capwap ap controller ip address <Management IP address of the WLC>

[nasersayar1]

Thanks Leo,

Now the AP is reg to the WLC but I do have another question we are using RADIUS server in our AD server and all clients MAC add is registered how I can configure the WLC to use that RADIUS server and Authenticate with the RADIUS server.

regards,

Naser  

[Leo Laohoo]

Kindly read this:  Configuring RADIUS

[nasersayar1]

Thanks I read that but couldn't find anything that weather this WLC is compatible with Microsoft Radius server or not?

[Leo Laohoo]

It is compatible with MS.

[nasersayar1]

But I couldn't find configuration steps on the document that you sent can you tell me the steps to configure it.

[Leo Laohoo]

Configuring Microsoft NPS (Network Policy Server) / (Internet Authentication Service)IAS as Wireless LAN Controller (WLC) RADIUS Server

5760/3850 Series WLC PEAP Authentication with Microsoft NPS Configuration Example

[nasersayar1]

thanks could you send me this for 5508 model as it is completely different than this.

regards,

[Scott Fella]

Just do a search on Google for this. There are many examples on how to do this with the WLC's. 

-Scott