OID for Cisco WLC coverage hole SNMP traps

[sossie]

Hi all,

We use a non-cisco network logging/monitoring tool that we are very happy with and don't want to change.

I would like to monitor and alert on coverage hole detection. At the end of the month we can do a report in our app and it will give the higest frequency points where coverage holes occur.

What I need to know is what MIB inculdes the coverage hole detection OID. I found this one:

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=AIRESPACE-WIRELESS-MIB

but it only seems to have "coverageThreshold" and others that do not match exactly.

What OID do I use for coverage hold alerts and what MIB is this contained in?

Thanks, Simon.

[sossie]

Have sort of answered it myself...

Have found this OID for Coverage pre-hole alarm:

1.3.6.1.4.1.9.9.615.0.1

It lives in this MIB:

CISCO-LWAPP-DOT11-CLIENT-MIB

If anyone knows the OID/MIB for coverage hole would be grateful.

Thanks, Simon

[Harish Chopra]

Hi Simon,

On my controller, when I am doing a SNMP walk for this OID, it is not responding at all.

Can you pls. help me what could be missing.

C:\Documents and Settings\Administrator>snmpwalk -v 2c -c public 10.10.10.4 1.3.6.1.4.1.9.9.615.0.1
SNMPv2-SMI::enterprises.9.9.615.0.1 = No Such Object available on this agent at this OID

Whereas, snmp walk works for most of the other MIBs.

C:\Documents and Settings\Administrator>snmpwalk -v 2c -c public 10.10.10.4 1.3.6.1.4.1.9.9.616
SNMPv2-SMI::enterprises.9.9.616.1.2.1.0 = Gauge32: 12000
SNMPv2-SMI::enterprises.9.9.616.1.2.2.0 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.616.1.2.3.0 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.616.1.2.4.0 = Gauge32: 5
SNMPv2-SMI::enterprises.9.9.616.1.2.5.0 = Gauge32: 10
SNMPv2-SMI::enterprises.9.9.616.1.2.6.0 = INTEGER: 48000

Regards

Harish

[Prakash Parvathala]

Great, if your solution is solved mark this discussion as answered/corrected . So it can help others.

Thank you