cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
355
Views
0
Helpful
1
Replies

Optimizing 1351 bridges for voice traffic

bdunsing2
Beginner
Beginner

Are there any "best practices" or recommended settings for optimizing voice traffic across a 1351 wireless bridge set? The 2 bridges are approx 200 feet from each other, no obstructions. Link tests from within the IOS show 1% retries and 54MB speed. However - 7920's at the remote location reboot (phones re-register) at least 4 times per day.

I have the bridge configured for Best Throughput. Should I disable to the lower data rates, since the APs are so close and unlikely to need them? That would decrease my "wireless ring" size and prevent interference from weaker signals.

Are there any settings (preamble, packet size, etc.) I should be tweaking in the 1351 settings to optimize voice traffic?

Any help will be appreciated.

Thank you -

1 Reply 1

bbaley
Participant
Participant

You can check this guide for more information on designing Vocie over WLAN:

http://cisco.com/en/US/solutions/collateral/ns340/ns394/ns348/net_implementation_white_paper0900aecd804f1a46.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers