cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1261
Views
5
Helpful
2
Replies
pcoyropcoyro
Beginner

Options 43/60 on multiple AP's

I am slightly confused about DHCP Option 43/60 with multiple AP's if they are going to the same WLC.  Our current setup is for AP's to get an Option 43 that directs them to a singular staging controller.  From the staging controller, they are configued with Antenna Type, AP Site Templates, etc.  I have 1131's, 1242's and we will soon be adding 1522's and 1524's.  Do I need to setup option 60 (VCI) for each AP if I just want all of them to go to one controller?  The 1131's and 1242 seem to be going to the correct location without Option 60.  Thanks.

2 REPLIES 2
Surendra BG
Cisco Employee

option 60 from my point of view its not needed!! if you are configuring the DHCP on the IOS device.. if its on the DHCP server configure it..

Regards

Surendra

Regards
Surendra BG

+5

Option 60 was created by evil persons to confuse people who don't need it and make them think it's needed

Create
Recognize Your Peers
Content for Community-Ad