05-28-2015 05:08 PM - edited 07-05-2021 03:19 AM
Hi Guys,
I have the same problem again which I thought was solved. My PC wireless adaptor not able to get ip address from the switch which is a dhcp server.
My setup is like this:
WLC5508 ---> 3750 (DHCP Server) ----> 3560 ---> Access Point
My pc wireless adaptor is connect to the WLAN but not able to get ip address. When I also connect my pc with a ethernet cable to the 3750 swtich my pc is able to get the address. Can someone please help me out again. Enclosed is the config of the dynamic interface. I have tried configuring ip address of the switch on the WLC but still no success.
Thanks
05-28-2015 06:38 PM
You have to configure your DHCP IP address under dynamic_interface configuration. Then you should able to get this working
HTH
Rasika
*** Pls rate all useful responses ****
07-20-2015 08:31 AM
"Enable Dynamic AP management" and Also mention DHCP Server ip in "Primary DHCP Server"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide