cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2008
Views
10
Helpful
2
Replies
acontreras1111
Beginner

Port channel Numbers

Hello,

 

I am setting up port channels for the first time in a new network.

I am using a cisco WS-C3850-24S switch to uplink our IDF's which are 2960x switches.

 

My question is if IDF 1 is uplinked on the 3850 on port 5 and the channel port group on the 3850 on port 5 is channel-group 5  mode active. Does uplink on the switch also have to be on channel-group 5?

Or can it be anynumber?

 

1 ACCEPTED SOLUTION

Accepted Solutions
Rasika Nayanajith
VIP Mentor

Channel group number is locally significant. So it does not need to match at both ends of the link.

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 REPLIES 2

It can be any number

Rasika Nayanajith
VIP Mentor

Channel group number is locally significant. So it does not need to match at both ends of the link.

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

Content for Community-Ad