07-05-2022 08:46 AM
hi guys.
i have a cisco 2960G-24Tc-l that connected to radio. occasionally the Communication port downed and lose its connection but the radio is on without any problem. the debugging cli only show that the port is shutting down.
i resolve this problem by removing the cable from switch and reloading the switch and putting the cable to switch.
is the problem in switch or in cable?
i suggest it s in switch.
07-05-2022 09:06 AM
Looks for me negotiation issue,
what logs you see on the console ?
can you post below information where the port connected :
show run interface gig x/x ( change this to where it connected port number)
show interface gig x/x
07-05-2022 05:50 PM
@chpmotry wrote:
i resolve this problem by removing the cable from switch and reloading the switch and putting the cable to switch.
Before rebooting the switch, post the complete output to the following commands:
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: