cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1608
Views
0
Helpful
7
Replies

Prime Infrastructure 2.2 Upgrade to 3.0

bm_5789
Beginner
Beginner

I am trying to do an inline upgrade from PI2.2 to PI3.0.  I copy the upgrade file to defaultRepo and start the ujpgrade process.   and verify the MD5 and SHA512 Checksums.  When I start the install, I get the following:

 

Initiating Application Upgrade...
Stage 1 of 7: Transferring file ...
-- complete.
Stage 2 of 7: Unpacking file ...
% Unable to unbundle the package. Package may be corrupt or there is not enough disk space

 

I verify the MD5 and SHA512 Checksums and they are correct.

 

What disk space might be the issue.  Can anyone advise what I should look at next.  TIA

7 Replies 7

Is it appliance or VM? If its appliance is it Gen 1 or Gen 2 ?

Regards,
Sathiyanarayanan Ravindran

Please rate the post and accept as solution, if my response satisfied your question:)

It a physical appliance, Gen 1. The document I have indicates I can do an inline upgrade from 2.2 to 3.0 on a Gen1 appliance.

 

Thanks for your help.

Version 3.0 is not supported on Gen 1 appliance . Ref Prime 3.0

 

Regards,
Sathiyanarayanan Ravindran

Please rate the post and accept as solution, if my response satisfied your question:)