Propagating VLAN and WLAN setting in converged access MC to MA

[b2b0000011]

Hi all,

We have setup 3 Catalyst 3650 in converged access mode. 

One is the Mobility Controller and 2 are the Mobility Agent.

i have setup the Switch Peer Group and it's working well

But when i add a new WLAN on the MC it does not propagate to the

MA's.

Do i have to setup a something for this or do i need to add the new WLAN

manually on all MA's ?

Thanks for any help

[b2b0000011]

here is my Wireless Mobility summary

Mobility Agent Summary:

Mobility Role                                   : Mobility Agent

Wireless Management VLAN                        : 10

Wireless Management IP Address                  : 10.10.0.3

Mobility Switch Peer Group Name                 : SPG-C1

Multicast IP Address                            : 0.0.0.0

DTLS Mode                                       : Enabled

Mobility Keepalive Interval/Count               : 10/3

Mobility Control Message DSCP Value             : 48

Switch Peer Group Members Configured            : 2

Central Management                              : Disabled

Link Status is Control Link Status : Data Link Status

The status of Mobility Controller: 

IP              Public IP            Link Status

------------------------------------------------

10.10.0.2       10.10.0.2            UP   : UP                      

Switch Peer Group members:

IP              Public IP            Data Link Status

-----------------------------------------------------

10.10.0.3       10.10.0.3            N/A                            

10.10.0.4       10.10.0.4            UP                             

[Rasika Nayanajith]

Do i have to setup a something for this or do i need to add the new WLAN manually on all MA's ?

Yes, you have to manually configure those WLAN configs on MA

HTH

Rasika

*** Pls rate all useful responses ***

[b2b0000011]

Thanks for you answer Rasika, does this means i have to add all the VLAN also manually ?